In recent years, there has been a noticeable increase in the number of rural houses.
It's like finding nature in apartment culture and going back to a house with a yard.
The place you requested is in front of the living room.
It's currently frozen, so it's designed to cover the sunlight.
In the case of an anning, you cannot use it if it is windy or snowy.
Also, it's made of fabric, so we need to replace it after a certain period of time.
It hasn't been long since it was constructed, but it's broken, so we decided to remove it and build a sunroom.
In rural houses, the floor area ratio is low.
Most of the time, we're building about 20% of the land area.
That's why the interior is often very narrow.
In such cases, there are many cases where there are no warehouses, laundry rooms, etc. except for residential spaces, or they are very small.
Using the spare space, you can make a sun room and use it for various purposes.
There are many kinds of materials used in the construction of the sunroom.
There's a huge cost difference depending on the specifications.
Generally, aluminum frames are constructed with glass.
It's a structure with good completeness and satisfaction after construction.
Aluminum has the advantage of being a heat treatment seal and being clean and not corroded.
Unless it's a standalone or very large size, we recommend a lot of aluminum frames.
Today's Sunroom frame is also made of aluminum black.
In the case of framing, it's the most important part of the construction of the sunroom.
Because there's nothing more important in architecture than the basics.
Unless it's a very unusual 스카이어닝 environment, the framework will be manufactured in the factory and visited on-site.
Usually, people divide it into 3~4 pieces and connect it in the field.
The reason for this is that we can reduce costs by reducing construction time.
It's because you can work with precision.
I assembled a factory-built frame and started working on glass.
It's the shape of the frame and the ceiling glass.
For the ceiling, we usually use 8mm thick reinforced glass to work on it.
If you're worried about glass, a lot of people are asking for a polycarbonate called rexane.
Rexane has the advantage of its high strength, but its thermal shrinkage and expansion causes noise.
He's weak with scratches, and after a few years he'll be almost translucent.
I don't recommend a house without the risk of falling objects.
There are many different types of glass available on the ceiling.
Even if it's tempered glass, it comes in many different thicknesses.
There's two sheets of bonding glass or double-layer glass that enhances the insulation.
Considering the cost-effectiveness and safety, we are using the most suitable glass.
When working with FM, it is best to use a bonded glass made by attaching two reinforced glass sheets.
I rarely use it because it's a bit pricey.
(In the case of tempered glass, it is visible on the floor of the skywalk.)
It's a complete construction.
Overall, we finished the aluminum frame with bronze-colored glass.
The front side was worked with a sliding window, and the entrance door was installed on the side, and the project window was constructed on the other side.
In the case of a sunroom, it can be constructed with a wide variety of materials depending on the application.
In case of sun rooms or shades, it is a room with good utilization such as greenhouse, external warehouse, barbecue place, rain forest, etc.
In the past, it used to be mostly sunshading to prevent obesity.
Recently, a lot of people are looking for a multi-purpose sunroom.
In this case, if you tell us what it's for, we can design it in a more appropriate space.